How building product manufacturers get specified
[edit] Introduction
Specification is the process by which a construction product, or a performance requirement it must meet, is written into the project documents for a building. For building product manufacturers, being specified is one of the most important routes to market. A product named in a specification is more likely to be bought for that project, and to be used on similar projects by the same design team.
Specification usually develops over several months, through research, comparison and discussion. Manufacturers that only engage at the point of purchase often find the key decisions have already been made.
[edit] Who specifies construction products
Depending on the project and procurement route, products may be specified by:
- architects and architectural technologists
- structural, civil and building services engineers
- specification writers and consultants
- contractors' design teams, particularly on design and build projects
- clients with their own technical standards, such as housebuilders and public bodies
[edit] Types of specification
A prescriptive (or proprietary) specification names a particular manufacturer and product. A performance specification sets out what the product must achieve, such as a fire classification, thermal performance or durability, and leaves the choice of product open. Many specifications combine the two, naming a product but allowing an alternative that meets the same requirements.
In the UK, many specifications are written using NBS systems, and manufacturers can list product information on platforms such as NBS Source.
[edit] Stages in the specification process
The route to specification typically has four stages:
- Discovery. The designer looks for a solution to a design problem, through online search, product libraries, trade press, colleagues and, increasingly, AI tools.
- Evaluation. A shortlist is compared on performance, compliance, certification, sustainability data, availability and cost.
- Specification. A product or performance requirement is written into the specification.
- Procurement and installation. The contractor, merchant and installer source the product. At this stage, specified products can be substituted with alternatives, often as part of value engineering.
[edit] What specifiers need from manufacturers
Specifiers generally need product information that is complete, accurate and easy to find. This typically includes:
- technical data sheets and installation guidance
- test evidence and classifications, such as fire and thermal performance
- third-party certification
- Environmental Product Declarations (EPDs)
- BIM objects and specification clauses
- case studies from comparable projects
- technical support and CPD seminars
Research by NBS has found gaps in what manufacturers provide. In its What Specifiers Want research, 43% of construction professionals said it isn't easy to find comprehensive detail about the safety performance of products, and 86% said EPDs are an important part of their decision-making.
[edit] Referrals and specification activity
Many manufacturers rely on referrals from contractors, merchants and existing customers. In a 2026 NBS survey of UK construction product manufacturers, 85% said they target architects and specifiers, but 72% said referrals are their primary source of leads. NBS noted that referrals are reactive, and that manufacturers who are not visible earlier in the specification process may miss opportunities.
[edit] The role of AI search
Designers are increasingly using AI tools in their work. RIBA's 2026 AI report found that 74% of UK architecture practices use AI, up from 59% in 2025 and 41% in 2024.
AI tools that answer product questions draw on published information, such as manufacturers' websites, product libraries, trade press articles and certification listings. Product information that is clear, consistent across all sources and confirmed by independent sources is more likely to be used in those answers.
[edit] Protecting a specification
A specification only results in a sale if the product is installed. Substitution can happen when a contractor or merchant proposes a cheaper alternative described as equivalent.
Manufacturers can reduce this risk by giving contractors and merchants clear comparison information, installation guidance and evidence of performance. On higher-risk buildings, the regime introduced by the Building Safety Act 2022 places greater scrutiny on changes to specified products, which makes accurate product information more important for everyone involved.
[edit] Measuring specification activity
Manufacturers may measure progress towards specification through:
- specification enquiries and CPD bookings
- downloads of technical documents, BIM objects and EPDs
- the number of projects where a product is named in the specification
- how often the brand is named when AI tools are asked relevant product questions
This article was written by John Wood of Dragonfly PR, an award-winning construction marketing agency based in Sheffield that works with building product manufacturers and construction businesses.
[edit] Related articles on Designing Buildings
- Specification
- Performance specification
- Prescriptive specification
- NBS
- Value engineering
- Environmental product declaration
- Building information modelling BIM
- Building Safety Act
- Continuing professional development CPD
[edit] References
- RIBA AI Report 2026, via CIC: AI adoption reaches tipping point across UK architecture https://www.cic.org.uk/news/ai-adoption-reaches-tipping-point-across-uk-architecture-but-human-judgement-remains-critical
- RIBA AI Report 2025: Second RIBA AI Report shows surge in usage among UK architects https://www.riba.org/knowledge-and-resources/knowledge-landing-page/second-riba-ai-report-shows-surge-in-usage-among-uk-architects
- NBS, 2026: specification gap guide for manufacturers, reported by Roofing Today https://roofingtoday.co.uk/nbs-tackles-the-specification-gap-in-new-guide-for-manufacturers/
- NBS, What Specifiers Want: Nine in ten architects want third-party certification for building products https://www.thenbs.com/manufacturers/news-and-press/nine-in-ten-architects-want-third-party-certification-for-building-products
[edit] Sources
- AI adoption reaches tipping point across UK architecture (RIBA AI Report 2026, via CIC): 74% of practices, up from 59% in 2025
- Second RIBA AI Report shows surge in usage among UK architects (RIBA, June 2025): 41% in 2024
- NBS tackles the specification gap in new guide for manufacturers (Roofing Today, September 2026): 85% target specifiers, 72% rely on referrals
- Nine in ten architects want third-party certification for building products (NBS, What Specifiers Want): 43% safety performance, 86% EPDs
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
ECA responds to the Milburn Report
Youth employment to be linked to workforce demand.
The construction industry urgently needs to attract new talent
CIOB responds to Neets report.
Grenfell Tower community update
Memorial columns to be retained as careful dismantling continues.
When buildings reflected the local resources available.
CIOB reports 57% are using artificial intelligence technologies.
More of England’s ‘hidden heroes’ will be celebrated.
CIAT calls for retrofit to be a priority.
Version 6 is now available, along with guidance for ECA members.
Post-War Homes: mid-century British architecture. Book review.
CIAT reflects on the party conferences.
CIOB announce the winners of the Art of Building photography competition.
National Scheme of Delegation introduced.
















